Flywoo Explorer LR: Lengthy vary GPS FPV drone underneath 250g

0

Flywoo Explorer Long Range GPS fpv drone

The Explorer LR was born from the collaboration between Flywoo and Dave_C, the inventor of the Micro Long Range brand. While in the past long-range quadcopters were large (7 inches) and heavy, those were Flywoo Explorer LR weighs less than 250 grams (including battery) and has a super compact air frame suitable for 4-inch sheets. In addition, according to the manufacturer, with the TBS Crossfire radio receiver, it can easily reach a cruising speed of 40-50 km / h, a flight time of up to 20 minutes and a range of about 10 km (6 miles).

Similar to HGLRC sector 132This FPV drone is also available with multiple types of cameras. While the cheapest version comes with RunCam Nano 2, the HD edition with DJI FPV goggles is compatible with the Caddx Vista HD system. Both analog versions (RC Nano 2 and Caddx Tarsier 4K) have the same GOKU VTX625 FPV transmitter with a VTX power of up to 450 mW.

Sponosored AD

Thanks to the integrated GOKU GPS mini positioning system and the Flywoo Finder buzzer alarm with its own power supply, it is very safe for long-haul flights.

Flywoo Explorer LR Specifications and Features

  • 4 “props compatible super light air frame;
  • GOKU F411 Micro Stack (flight controller + BS13A ESC);
  • GOKU GPS mini module and Flywoo finder buzzer;
  • Flywoo NIN 1404 V2 2750KV motors with Gemfan 4024 propellers;
  • 3 camera options (DJI FPV, RunCam Nano 2 or Caddx Tarsier 4K V2);
  • The HD edition is compatible with DJI FPV glasses.
  • The analog version is supplied with GOKU VTX625 VTX (PIT / 25 mW / 50 mW / 100 mW / 200 mW / 450 mW).
  • 4S LIPO compatible (recommended capacity 650 ~ 1300 mAh);
  • Optional radio receiver FrSky R9MM, FrSky XM + or TBS Crossfire.

Flywoo Explorer accessories

Supplied accessories for the Flywoo Explorer LR drone

  • 2 pairs of propellers (1 set of blue and 1 set of black);
  • Pack of screws;
  • free forearms;
  • lateral carbon plates;
  • 4 x 10mm arm LED board;
  • Flywoo sticker.

Main parts

Main parts

Flight control specifications
  • MCU: STM32F411;
  • Firmware target: FLYWOOF411;
  • IMU: MPU6000 Gyro / Accelerometer (SPI);
  • OSD: BetaFlight OSD with AT7456E chip;
  • Black box: 8M;
  • LED: 8 * WS2812;
  • BEC output: 5 V at 2A;
  • Integrated LC filter;
  • Firmware target: FLYWOOF411;
  • Size: 24 Ă— 24mm (16 x 16mm mounting holes);
  • Weight: 2.6 grams.
GOKU BS13A ESC specifications
  • MCU: BB21F16G;
  • Continuous current: 13A;
  • Input: 2-4s lipo;
  • Supports Dshot600, Oneshot and Multishot;
  • Size: 24 Ă— 24mm (16 x 16mm mounting holes);
  • Weight: 2.6 grams.
Functions of the GOKU GPS Mini V1.0 module
  • Before deactivating, the GPS must search for more than 5 satellites in order to lock the starting position.
  • After deactivating, observe the OSD data in flight. The rescue function can only function normally if the distance exceeds 100 m.
  • If the remote control suddenly loses the signal, the GPS rescue function will work automatically and return to the starting position.
  • Set the AUX of the GPS rescue mode in BetaFlight Failsafe. The default setting is AUX3 2000.
GOKU VTX625 VTX specifications
  • Output power: PIT / 25 mW / 50 mW / 100 mW / 200 mW / 450 mW switchable;
  • Control mode: Beta Flight OSD control or button;
  • LED: 4 * WS2812;
  • Video system: NTSC / PAL;
  • Antenna: IPEX;
  • Size: 31 x 31mm;
  • Weight: 3 grams.

Leave A Reply

Your email address will not be published.