URUAV Flipo F95 Pusher Model CineWhoop

0

#AD: drone sales

Similar to Beta95X V3The URUAV Flipo F95 also has a pusher design (up-side-down motors). This approach offers better performance and greater stability.

In addition to the frontal Runcam Nano 2 camera, the URUAV F95 can carry an ultra-light 4K camera such as a bare GoPro or Insta SMO 4K. The real-time image transmission takes place with a 5.8 GHz 40 CH FPV transmitter (VTX) with a transmission power of up to 300 mW. Thanks to the TBS Smart Audio function, the transmission power and band can also be set remotely.

The tiny 4500 kV brushless motors are matched to Gemfan D63 2.5 propeller propellers. According to the specified specifications, you can achieve a flight time of approximately 4 minutes with a 4S 450mAh battery.

URUAV Flipo F95 Features and Specifications

  • 95 mm carbon fiber frame with pusher design (inverted motors);
  • CineWhoop mudguards with EVA protective foam;
  • F4 AIO flight controller with integrated 20A ESC;
  • 1106 4500KV 2-4s brushless motors with Gemfan D63 2.5 inch propellers;
  • Runcam Nano 2 1200TVL FPV Camera;
  • XF5805 5.8G 40CH 25/100 / 300mW VTX;
  • Naked GoPro, SMO 4K and Insta360 GO compatible;
  • 4S LIPO compatible (~ 4 minutes flight time with 4s / 450mAh);
  • Optional FrSky XM + radio receiver.

Product details

Product details

Flight control specifications

  • CPU: STM32F405 (168 MHz);
  • IMU: MPU6000 (SPI connection);
  • Firmware: GEPR / GEPRCF405;
  • OSD: Built-in OSD (STM32 controls the OSD chip via SPI);
  • Supports programmable LED like WS2812;
  • Built-in current sensor;
  • Reserved buzzer interface;
  • Support Frsky / Flysky / Futaba / TBS Crossfire radio receivers;
  • Size: 30 x 30mm (26 x 26mm mounting holes);
  • Weight: 6.4 grams.

Integrated ESC specifications

  • Input voltage: 2-4S Lipo;
  • Constant current: 20A;
  • CPU: EFM8BB21F16G;
  • Motor connection: 1.25 mm pin header connection;
  • Firmware: G-H-30-16.7;
  • Supports BLHELI_S all functions;
  • PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 compatible.

Engine specifications

  • KV: 4500 rpm / volt;
  • Lipo cell: 2-4 sl
  • No-load current (IO / 10 V): 0.185;
  • Maximum continuous current: 7.0 A;
  • Maximum continuous output: 110 W;
  • Maximum thrust: 269 g (16.8 V / 4024 R);
  • Configuration: 12N / 14P;
  • Motor Resistance (Rm): 0.481 Ω;
  • Stator diameter: 13 mm;
  • Stator length: 6 mm;
  • Motor dimensions: 14.2 Ă— 14.5 mm;
  • Total wavelength: 4 mm;
  • Shaft diameter: 1.5mm;
  • Screw holes spacing: 9 * 9mm;
  • Screw thread: M2;
  • Recommend propellers: 2.5 inches;
  • Weight: 10.8 grams.

Leave A Reply

Your email address will not be published.